tscircuit/boosters
This code defines PCB schematics, footprints, and 3D CAD models for various integrated circuits, connectors, sensors, and electronic components used in TI booster packs and modules.
- Version
- 0.1.19
- License
- unset
- Stars
- 0
boostxl-cc2650ma/index.circuit.tsx
PCB
Schematic
import { CC2650MODAMOHR } from "./imports/CC2650MODAMOHR"
import { FTSH_105_01_F_DV_K } from "./imports/FTSH_105_01_F_DV_K"
import { MX25R8035FZUIL0 } from "./imports/MX25R8035FZUIL0"
import { SSQ_110_23_L_D } from "./imports/SSQ_110_23_L_D"
const N = {
V33: "net.V33",
VDD: "net.VDD_CC2650M",
GND: "net.GND",
DIO0_TX: "net.DIO0_TX",
DIO1_RX: "net.DIO1_RX",
DIO2: "net.DIO2",
DIO2_HDR: "net.DIO2_HDR",
DIO3: "net.DIO3",
DIO3_HDR: "net.DIO3_HDR",
DIO4: "net.DIO4",
DIO4_HDR: "net.DIO4_HDR",
DIO5: "net.DIO5",
DIO5_HDR: "net.DIO5_HDR",
DIO6: "net.DIO6",
DIO6_HDR: "net.DIO6_HDR",
DIO7: "net.DIO7_MRDY",
DIO7_HDR: "net.DIO7_HDR",
DIO8: "net.DIO8_SRDY",
DIO8_HDR: "net.DIO8_HDR",
DIO9: "net.DIO9_CS",
CS: "net.CS",
DIO10: "net.DIO10_CLK",
DIO11: "net.DIO11_MOSI",
DIO12: "net.DIO12_MISO",
DIO13: "net.DIO13",
DIO14: "net.DIO14",
DIO14_HDR: "net.DIO14_HDR",
JTAG_TMS: "net.JTAG_TMS",
JTAG_TCK: "net.JTAG_TCK",
NRESET: "net.NRESET",
LP_RESET: "net.LP_RESET",
LEGACY_RESET: "net.LEGACY_RESET",
LED_GREEN: "net.LED_GREEN",
LED_RED: "net.LED_RED",
FLASH_WP: "net.FLASH_WP",
FLASH_HOLD: "net.FLASH_HOLD",
} as const
const verticalPinStyle = (pins: number[], margin: string) =>
Object.fromEntries(
pins.map((pin) => [
`pin${pin}`,
{ marginTop: margin, marginBottom: margin },
]),
)
const horizontalPinStyle = (pins: number[], margin: string) =>
Object.fromEntries(
pins.map((pin) => [
`pin${pin}`,
{ marginLeft: margin, marginRight: margin },
]),
)
const HEADER_PIN_STYLE = verticalPinStyle(
Array.from({ length: 20 }, (_, index) => index + 1),
"0.18mm",
)
const MODULE_PIN_STYLE = {
...verticalPinStyle(
[2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 24],
"0.16mm",
),
...horizontalPinStyle([22, 23], "0.35mm"),
...horizontalPinStyle([1, 3, 25, 26, 27, 28, 29], "0.18mm"),
}
const DEBUG_HEADER_PIN_STYLE = verticalPinStyle(
Array.from({ length: 10 }, (_, index) => index + 1),
"0.15mm",
)
const FLASH_PIN_STYLE = verticalPinStyle(
Array.from({ length: 9 }, (_, index) => index + 1),
"0.15mm",
)
export default function Circuit() {
return (
<board
name="BOOSTXL_CC2650MA"
width="75.3mm"
height="28mm"
outline={[
{ x: -37.65, y: -14 },
{ x: 37.65, y: -14 },
{ x: 37.65, y: 14 },
{ x: -37.65, y: 14 },
]}
layers={2}
solderMaskColor="red"
silkscreenColor="white"
defaultTraceWidth="0.15mm"
minTraceWidth="0.15mm"
minViaHoleDiameter="0.2mm"
minViaPadDiameter="0.45mm"
autorouter={{
preset: "auto_local",
local: true,
traceClearance: "0.15mm",
}}
autorouterEffortLevel="5x"
// TI's original component centroids are tighter than tscircuit's generic
// courtyard estimates. Preserve those source placements and still route.
placementDrcChecksDisabled
>
<schematicsheet
name="radio-interface"
displayName="CC2650 Module and LaunchPad Interface"
sheetIndex={1}
/>
<schematicsheet
name="debug-flash"
displayName="JTAG and Optional External Flash"
sheetIndex={2}
/>
<schematicsheet
name="power-status"
displayName="Power, Test Points, and Status LEDs"
sheetIndex={3}
/>
<group
name="RADIO_INTERFACE"
schSheetName="radio-interface"
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schMaxTraceDistance="1.1mm"
schTraceAutoLabelEnabled
>
<schematictext
text="CC2650MODA + BoosterPack interface"
schX={-14.5}
schY={8.8}
fontSize={0.3}
anchor="center_left"
/>
<SSQ_110_23_L_D
name="J1"
layer="bottom"
schX={-9}
schY={1.5}
schWidth="5.8mm"
schHeight="10.5mm"
schPinStyle={HEADER_PIN_STYLE}
schPinArrangement={{
leftSide: {
pins: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19],
direction: "top-to-bottom",
},
rightSide: {
pins: [2, 4, 6, 8, 10, 12, 14, 16, 18, 20],
direction: "top-to-bottom",
},
}}
pcbX={-12.997}
pcbY={0.03}
pcbRotation={90}
noConnect={["pin2", "pin4", "pin6", "pin8", "pin10", "pin12", "pin14", "pin16", "pin18", "pin20"]}
connections={{
pin1: N.V33,
pin3: N.DIO7_HDR,
pin5: N.DIO0_TX,
pin7: N.DIO1_RX,
pin9: N.DIO2_HDR,
pin11: N.DIO3_HDR,
pin13: N.DIO10,
pin15: N.DIO4_HDR,
pin17: N.DIO5_HDR,
pin19: N.DIO6_HDR,
}}
/>
<CC2650MODAMOHR
name="U2"
schX={0}
schY={1}
schWidth="7.4mm"
schHeight="11.5mm"
schPinStyle={MODULE_PIN_STYLE}
schPinArrangement={{
leftSide: {
pins: [4, 5, 6, 7, 8, 11, 12, 14, 15, 16, 17, 18, 19, 20, 21],
direction: "top-to-bottom",
},
rightSide: {
pins: [9, 10, 13, 2, 24],
direction: "top-to-bottom",
},
topSide: {
pins: [22, 23],
direction: "left-to-right",
},
bottomSide: {
pins: [1, 3, 25, 26, 27, 28, 29],
direction: "left-to-right",
},
}}
pcbX={-25.6}
pcbY={0.85}
pcbRotation={90}
internallyConnectedPins={[
["pin1", "pin3", "pin25", "pin26", "pin27", "pin28", "pin29"],
["pin22", "pin23"],
]}
noConnect={["pin2", "pin24"]}
connections={{
pin1: N.GND,
pin3: N.GND,
pin4: N.DIO0_TX,
pin5: N.DIO1_RX,
pin6: N.DIO2,
pin7: N.DIO3,
pin8: N.DIO4,
pin9: N.JTAG_TMS,
pin10: N.JTAG_TCK,
pin11: N.DIO5,
pin12: N.DIO6,
pin13: N.NRESET,
pin14: N.DIO7,
pin15: N.DIO8,
pin16: N.DIO9,
pin17: N.DIO10,
pin18: N.DIO11,
pin19: N.DIO12,
pin20: N.DIO13,
pin21: N.DIO14,
pin22: N.VDD,
pin23: N.VDD,
pin25: N.GND,
pin26: N.GND,
pin27: N.GND,
pin28: N.GND,
pin29: N.GND,
}}
/>
<SSQ_110_23_L_D
name="J2"
layer="bottom"
schX={8.2}
schY={1.5}
schWidth="5.8mm"
schHeight="10.5mm"
schPinStyle={HEADER_PIN_STYLE}
schPinArrangement={{
leftSide: {
pins: [1, 3, 5, 7, 9, 11, 13, 15, 17, 19],
direction: "top-to-bottom",
},
rightSide: {
pins: [2, 4, 6, 8, 10, 12, 14, 16, 18, 20],
direction: "top-to-bottom",
},
}}
pcbX={30.203}
pcbY={0.03}
pcbRotation={90}
noConnect={["pin1", "pin3", "pin5", "pin7", "pin8", "pin9", "pin13", "pin15", "pin17", "pin19"]}
connections={{
pin2: N.GND,
pin4: N.DIO8_HDR,
pin6: N.CS,
pin10: N.LP_RESET,
pin11: N.NRESET,
pin12: N.DIO11,
pin14: N.DIO12,
pin16: N.DIO13,
pin18: N.DIO14_HDR,
pin20: N.LEGACY_RESET,
}}
/>
<resistor name="R9" resistance="0ohm" footprint="0603" manufacturerPartNumber="CRCW06030000Z0EC" schX={3} schY={-5} pcbX={-2.35} pcbY={-1.3} pcbRotation={180} connections={{ pin1: N.DIO7_HDR, pin2: N.DIO7 }} />
<resistor name="R13" resistance="0ohm" footprint="0603" manufacturerPartNumber="CRCW06030000Z0EC" schX={3} schY={-6.9} pcbX={-2.35} pcbY={1.4} connections={{ pin1: N.DIO8, pin2: N.DIO8_HDR }} />
<resistor name="R17" resistance="0ohm" footprint="0603" manufacturerPartNumber="CRCW06030000Z0EC" schX={9} schY={-6.9} pcbX={16.15} pcbY={-7.9} connections={{ pin1: N.NRESET, pin2: N.NRESET }} />
<resistor name="R20" resistance="0ohm" footprint="0603" manufacturerPartNumber="CRCW06030000Z0EC" schX={3} schY={-8.8} pcbX={-21.15} pcbY={7.4} connections={{ pin1: N.DIO9, pin2: N.CS }} />
<group name="DNM_RADIO_OPTIONS" bomDisabled>
<resistor name="R7" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-9} schY={-5} pcbX={-2.35} pcbY={-3} pcbRotation={180} connections={{ pin1: N.DIO3_HDR, pin2: N.DIO3 }} />
<resistor name="R8" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-3} schY={-5} pcbX={-2.45} pcbY={-9.2} connections={{ pin1: N.DIO2_HDR, pin2: N.DIO2 }} />
<resistor name="R10" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={9} schY={-5} pcbX={-2.35} pcbY={-4.4} connections={{ pin1: N.DIO4_HDR, pin2: N.DIO4 }} />
<resistor name="R11" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-9} schY={-6.9} pcbX={-2.45} pcbY={-6.1} connections={{ pin1: N.DIO5_HDR, pin2: N.DIO5 }} />
<resistor name="R12" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-3} schY={-6.9} pcbX={-2.45} pcbY={-7.7} connections={{ pin1: N.DIO6_HDR, pin2: N.DIO6 }} />
<resistor name="R18" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-9} schY={-8.8} pcbX={16.15} pcbY={-9.333} pcbRotation={180} connections={{ pin1: N.LP_RESET, pin2: N.NRESET }} />
<resistor name="R19" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-3} schY={-8.8} pcbX={16.15} pcbY={-10.766} pcbRotation={180} connections={{ pin1: N.LEGACY_RESET, pin2: N.NRESET }} />
<resistor name="R21" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={9} schY={-8.8} pcbX={16.15} pcbY={-12.199} pcbRotation={180} connections={{ pin1: N.LEGACY_RESET, pin2: N.DIO9 }} />
<resistor name="R22" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={-3} schY={-10} pcbX={1.55} pcbY={-9.4} pcbRotation={180} connections={{ pin1: N.V33, pin2: N.DIO5 }} />
<resistor name="R23" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schX={3} schY={-10} pcbX={1.55} pcbY={-10.65} pcbRotation={180} connections={{ pin1: N.V33, pin2: N.DIO6 }} />
</group>
</group>
<group
name="DEBUG_AND_FLASH"
schSheetName="debug-flash"
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schMaxTraceDistance="1.1mm"
schTraceAutoLabelEnabled
>
<schematicsection name="JTAG" displayName="1.27 mm JTAG Debug Header" sectionTitleFontSize="0.2mm" />
<FTSH_105_01_F_DV_K
name="P20"
schSectionName="JTAG"
schX={-7}
schY={2}
schWidth="4mm"
schHeight="5.5mm"
schPinStyle={DEBUG_HEADER_PIN_STYLE}
schPinArrangement={{
leftSide: {
pins: [1, 3, 5, 7, 9],
direction: "top-to-bottom",
},
rightSide: {
pins: [2, 4, 6, 8, 10],
direction: "top-to-bottom",
},
}}
pcbX={-23.39}
pcbY={-8.8}
pcbRotation={180}
noConnect={["pin7"]}
connections={{
pin1: N.V33,
pin2: N.JTAG_TMS,
pin3: N.GND,
pin4: N.JTAG_TCK,
pin5: N.GND,
pin6: N.DIO5,
pin8: N.DIO6,
pin9: N.GND,
pin10: N.NRESET,
}}
/>
<schematicsection name="OPTIONAL_FLASH" displayName="Optional MX25R8035F Flash (DNM)" sectionTitleFontSize="0.2mm" />
<group name="DNM_FLASH_OPTIONS" bomDisabled>
<MX25R8035FZUIL0
name="U3"
showAsTranslucentModel
schSectionName="OPTIONAL_FLASH"
schX={5}
schY={2}
schWidth="4.8mm"
schHeight="5.8mm"
schPinStyle={FLASH_PIN_STYLE}
schPinArrangement={{
leftSide: {
pins: [1, 3, 7, 4, 9],
direction: "top-to-bottom",
},
rightSide: {
pins: [8, 6, 5, 2],
direction: "top-to-bottom",
},
}}
pcbX={5.35}
pcbY={-7.55}
pcbRotation={270}
connections={{
pin1: N.DIO14,
pin2: N.DIO12,
pin3: N.FLASH_WP,
pin4: N.GND,
pin5: N.DIO11,
pin6: N.DIO10,
pin7: N.FLASH_HOLD,
pin8: N.V33,
pin9: N.GND,
}}
/>
<resistor name="R24" showAsTranslucentModel resistance="0ohm" footprint="0603" manufacturerPartNumber="DNM" schSectionName="OPTIONAL_FLASH" schX={1} schY={-2.5} pcbX={-2.3} pcbY={4.45} pcbRotation={180} connections={{ pin1: N.DIO14_HDR, pin2: N.DIO14 }} />
<resistor name="R25" showAsTranslucentModel resistance="10kohm" footprint="0402" manufacturerPartNumber="DNM" schSectionName="OPTIONAL_FLASH" schX={4} schY={-2.5} pcbX={-5.85} pcbY={6.788} pcbRotation={270} connections={{ pin1: N.V33, pin2: N.DIO14 }} />
<resistor name="R26" showAsTranslucentModel resistance="10kohm" footprint="0402" manufacturerPartNumber="DNM" schSectionName="OPTIONAL_FLASH" schX={7} schY={-2.5} pcbX={2.812} pcbY={-7.85} connections={{ pin1: N.V33, pin2: N.FLASH_WP }} />
<resistor name="R27" showAsTranslucentModel resistance="10kohm" footprint="0402" manufacturerPartNumber="DNM" schSectionName="OPTIONAL_FLASH" schX={10} schY={-2.5} pcbX={7.75} pcbY={-6.862} pcbRotation={270} connections={{ pin1: N.V33, pin2: N.FLASH_HOLD }} />
</group>
<capacitor
name="C1"
capacitance="100nF"
footprint="0402"
manufacturerPartNumber="GRM155R70J104KA01D"
schSectionName="OPTIONAL_FLASH"
schX={13}
schY={-2.5}
pcbX={6.088}
pcbY={-5.6}
pcbRotation={180}
connections={{ pin1: N.V33, pin2: N.GND }}
/>
</group>
<group
name="POWER_AND_STATUS"
schSheetName="power-status"
schX={0}
schY={0}
pcbX={0}
pcbY={0}
schMaxTraceDistance="1.1mm"
schTraceAutoLabelEnabled
>
<schematictext text="Removable current-measurement link" schX={-13.5} schY={6.2} fontSize={0.24} anchor="center_left" />
<pinheader
name="P2"
pinCount={2}
pitch="2.54mm"
gender="male"
manufacturerPartNumber="BB02-HC021-KB1-603000"
holeDiameter="1.05mm"
platedDiameter="1.8mm"
schX={-7}
schY={3}
pcbX={-3.02}
pcbY={11.4}
pcbRotation={180}
connections={{ pin1: N.VDD, pin2: N.V33 }}
/>
<schematictext text="M1 SNT-100-BK-G shunt installed on P2" schX={-11} schY={0.5} fontSize={0.2} anchor="center_left" />
<group name="DNM_CURRENT_LINK" bomDisabled>
<resistor
name="R16"
showAsTranslucentModel
resistance="0ohm"
footprint="0603"
manufacturerPartNumber="DNM"
schX={-3}
schY={3}
pcbX={-2.75}
pcbY={8.6}
connections={{ pin1: N.V33, pin2: N.VDD }}
/>
</group>
<schematicsection name="STATUS_LEDS" displayName="DIO2 Green and DIO4 Red Status LEDs" sectionTitleFontSize="0.2mm" />
<resistor name="R5" resistance="180ohm" footprint="0402" manufacturerPartNumber="CRCW0402180RJNED" schSectionName="STATUS_LEDS" schX={2} schY={3} pcbX={15.438} pcbY={10.9} pcbRotation={180} connections={{ pin1: N.LED_GREEN, pin2: N.DIO2 }} />
<led name="CR1" color="green" footprint="0603" manufacturerPartNumber="LP L296-J2L2-25" schSectionName="STATUS_LEDS" schX={5} schY={3} pcbX={15.502} pcbY={11.999} pcbRotation={180} connections={{ pin1: N.LED_GREEN, pin2: N.GND }} />
<resistor name="R6" resistance="220ohm" footprint="0402" manufacturerPartNumber="CRCW0402220RJNED" schSectionName="STATUS_LEDS" schX={8} schY={3} pcbX={10.988} pcbY={10.9} pcbRotation={180} connections={{ pin1: N.LED_RED, pin2: N.DIO4 }} />
<led name="CR2" color="red" footprint="0603" manufacturerPartNumber="LS L296-P2Q2-1" schSectionName="STATUS_LEDS" schX={11} schY={3} pcbX={10.902} pcbY={11.999} pcbRotation={180} connections={{ pin1: N.LED_RED, pin2: N.GND }} />
<schematicsection name="TEST_POINTS" displayName="Reference Test Points (TI MH1-MH3)" sectionTitleFontSize="0.2mm" />
<testpoint name="TP1" displayName="MH1 GND" footprintVariant="through_hole" holeDiameter="1.1mm" padDiameter="1.8mm" schSectionName="TEST_POINTS" schX={2} schY={-2} pcbX={10.55} pcbY={-11.9} connections={{ pin1: N.GND }} />
<testpoint name="TP2" displayName="MH2 3V3" footprintVariant="through_hole" holeDiameter="1.1mm" padDiameter="1.8mm" schSectionName="TEST_POINTS" schX={6} schY={-2} pcbX={-4.25} pcbY={6.6} connections={{ pin1: N.V33 }} />
<testpoint name="TP3" displayName="MH3 VDD" footprintVariant="through_hole" holeDiameter="1.1mm" padDiameter="1.8mm" schSectionName="TEST_POINTS" schX={10} schY={-2} pcbX={-1.45} pcbY={6.6} connections={{ pin1: N.VDD }} />
</group>
<keepout shape="rect" width="6.2mm" height="18mm" pcbX={-34.4} pcbY={0.85} layers={["top", "bottom"]} />
<keepout shape="rect" width="75mm" height="0.6mm" pcbX={0} pcbY={13.65} layers={["top", "bottom"]} />
<keepout shape="rect" width="75mm" height="0.6mm" pcbX={0} pcbY={-13.65} layers={["top", "bottom"]} />
<keepout shape="rect" width="0.6mm" height="27mm" pcbX={37.3} pcbY={0} layers={["top", "bottom"]} />
<keepout shape="rect" width="0.6mm" height="27mm" pcbX={-37.3} pcbY={0} layers={["top", "bottom"]} />
<copperpour layer="top" connectsTo={N.GND} clearance="0.15mm" boardEdgeMargin="0.5mm" />
<copperpour layer="bottom" connectsTo={N.GND} clearance="0.15mm" boardEdgeMargin="0.5mm" />
<silkscreentext text="CC2650 Module BoosterPack" pcbX={4} pcbY={7.8} fontSize="1mm" />
<silkscreentext text="BOOSTXL-CC2650MA Rev 1.0" pcbX={5} pcbY={5.9} fontSize="0.65mm" />
<silkscreentext text="ANTENNA - NO COPPER" pcbX={-33.5} pcbY={-9.5} pcbRotation={90} fontSize="0.55mm" />
<silkscreentext text="CURRENT" pcbX={-3.1} pcbY={13} fontSize="0.55mm" />
<silkscreentext text="RED DIO4" pcbX={10.8} pcbY={13} fontSize="0.5mm" />
<silkscreentext text="GREEN DIO2" pcbX={15.6} pcbY={13} fontSize="0.5mm" />
</board>
)
}
Related Packages
More from this authortscircuit/autorouting-dataset-01This code manages the hardware and electronic components for circuit design and PCB layout, defining components like resistors, capacitors, transistors, connectors, and footprints, and providing tools for component placement, PCB topology, and electrical connections.
Similar packageabse/boostxl-sharp128This code defines a printed circuit board (PCB) with various surface-mount resistors, capacitors, inductors, and integrated circuits, including power management components and interface connectors, for a TI-based LCD and microSD module using 0603 and other package types.