imrishabh18/rp2040-motor-controller
Bottom-side PCB silkscreen artwork implementing mirrored tsCircuit logos as embedded SVG paths, with via-clearance-aware placement and no active electronics.
- Version
- 1.0.57
- License
- unset
- Stars
- 5
schematic/sheetSectionRows.ts
type SectionRow = readonly string[] | {
sections: readonly string[];
justify: "center" | "space-between";
gapAfter?: number;
};
/** Left-to-right schematic section order within each sheet row. */
export const sheetSectionRows: Readonly<
Record<string, readonly SectionRow[]>
> = {
controller: [
{ sections: ["MCU__rp2040", "MCU__clock"], justify: "center", gapAfter: 1 },
{ sections: ["MCU__analog_supply", "MCU__io_bypass"], justify: "space-between" },
],
controller_programming: [
["MCU__usb", "MCU__programming_supply", "MCU__programming_flash"],
["MCU__programming_bypass"],
],
motor_driver: [
{ sections: ["driver_enable", "motor_driver_core", "motor_driver_outputs"], justify: "center", gapAfter: 4 },
["driver_supply", "driver_reference", "driver_current_limit"],
],
motor_power: [
["motor_pd_connector", "motor_power_pd_negotiation", "motor_power_filtering"],
["motor_power_monitor", "mounting_ground"],
],
thermal_protection: [["thermal_protection", "enable_default"]],
position_alarm: [["encoder", "alarm", "feedback_supply"]],
current_telemetry: [
{ sections: ["phase_A", "phase_B"], justify: "center", gapAfter: 3.8 },
{ sections: ["current_supply"], justify: "center" },
],
status_led: [["rgb_red", "rgb_green", "rgb_blue", "rgb"]],
pd_voltage_control: [["pd_gpio_buffers", "pd_power_good", "pd_supply_discharge"]],
controller_controls: [["MCU__controls"]],
};